Behringer EP4000 Power Amplifier

Available: New & Used

Professional 4,000-Watt Stereo Power Amplifier with ATR (Accelerated Transient Response) Technology

 

Features

  • 2 x 2,000 Watts into 2 Ohms; 2 x 1,400 Watts into 4 Ohms; 4,000 Watts into 4 Ohms (bridge mode)
  • ATR (Accelerated Transient Response) technology for ultimate punch and clarity
  • Switchable limiters offer maximum output level with reliable overload protection
  • Detented gain controls for precise setting and matching of sensitivity
  • Precise Power, Signal and Clip LEDs to monitor performance
  • XLR and 1/4" TRS input connectors for compatibility with any source
  • Professional speaker connectors and "touch-proof" binding posts support most speaker wiring systems
  • Selectable low-frequency filters remove damaging infra-sound frequencies
  • Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers
  • High-current toroidal transformer for ultra-high transient response and absolute reliability
  • "Back-to-front" ventilation system including air filter for reliable operation
  • "Built-like-a-tank," impact-resistant, all-steel 2U rackmount chassis
  • High-quality components and exceptionally rugged construction ensure long life
  • Conceived and designed by BEHRINGER Germany

Specifications

Power Output:
  • 20 Hz - 20kHz @ 0.1% THD, both channels driven
  • 8Ω per channel @ 550W
  • 4Ω per channel @ 950W
  • 2Ω per channel @ 1250W
RMS @ 1% THD (sine wave), bridge mode
  • @ 1750W
  • 4Ω @ 2400W
Peak Power, both channels driven:
  • 8Ω @ 750W
  • 4Ω @ 1400W
  • 2Ω @ 2000W
Peak Power, bridge mode:
  • 8Ω @ 2800W
  • 4Ω @ 4000W
  • Distortion: <0.02%

Frequency Response:

  • At 10dB below rated: 20 Hz - 20kHZ, +0/-dB
  • At -3 dB points: 5Hz - 50 kHz

Damping Factor:

  • > 300 @ 8Ω

Noise:

  • Unweighted, 20 Hz to 20 kHz - 100 dB

Voltage gain:

  • 40X (32 dB), 50X (34 dB)

Input sensitivity:

  • VRMS (@ 8Ω) - 1.15V (+3.4dBu)

Input Impedance:

  • 10kΩ unbalanced, 20 kΩ balanced
Controls:
  • Front: (Power switch, gain control ~ channels 1 and 2)
  • Rear: DIP switched (10x)
Indicators:
  • Power: green LED
  • Clip: red LED, 1 per channel
  • Signal: yellow LED, 1 per channel

Connectors:

  • Inputs: Balanced XLR and 1/4" TRS connectors
  • Outputs: Touch-proof binding posts and professional speaker connectors.

Cooling:

  • Continuously variable speed fan, back-to-front air flow.

Amplifier protection:

  • Full short circuit, open circuit, thermal and HF protection Stable into reactive or mismatched loads.

Load Protection:

  • Turn-on/off muting, AC coupling

Output circuit type:

  • Class H complementary linear output

Power Supply:

  • Mains voltage/Breaker: 100-120 V ~, 50/60 Hz 15A, 220 - 230 V ~, 50/60 Hz 8A

Power Consumption:

  • 2600W

Main Connector:

  • Standard IEC receptacle

Dimensions:

  • Approx. 3.5" x 19" x 15.8"

Weight:

  • Approx. 36.6 lbs / 16.6 kg

Manual

Download Link

Go to top